TSE Audio X50 V2.4.8 Plugin Review: The Pros, Cons, and Comparison of the Rock and Metal Suite
Introduction
If you are looking for a versatile and realistic guitar amp simulation plugin that can handle any rock or metal genre, you might want to check out TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R. This is a software plugin that offers a complete suite for a quick guitar tone setup for rock and metal. It uses one of the most advanced modeling algorithms presented in a commercial plugin to this date, offering a real-time simulation of the electrical network in the stompbox/amp with acceptable cpu usage for modern processors. This is the new flagship TSE model, taken to the next level of realism!
Tse X50 V2 Keygen 25
In this article, I will provide you with an outline and a detailed review of this plugin, as well as some tips on how to install it and use it effectively. Let's get started!
Review
The TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R plugin consists of several components that work together to create a powerful and flexible guitar tone chain. These components are:
PEDAL BOARD - This includes a NoiseGate, a TSE808 overdrive pedal, a R47 distortion pedal, a Phaser, a Pandora's Box modulation pedal, and a SDM-2 distortion pedal. You can use these pedals to shape your guitar signal before it reaches the amp.
TSE X50 v2.0 Pre+PA - This is the main amp model of the plugin, which is a digital emulation of a famous US guitar amp. Because two almost similar amps were made, both red channels are modeled. The green channel is modeled after the first amp. You can switch between MK1 and MK2 versions of the red channel, as well as bypass the preamp or poweramp sections.
TSE X30 v2.0 Preamp - This is another amp model of the plugin, which is a digital emulation of a hi-gain guitar amplifier. It is completely re-modeled with new interconnecting algorithms.
RACK - This includes a Tuner, a Delay, an Equalizer, and a Reverb. These are essential tools for getting that quick, good tone.
Power Tubes - You can switch between using 6L6GC or EL34 pentode models in the PowerAmp model.
BIAS - You can use the bias control to set the operating-point that suits you most in the PowerAmp model.
Oversampling - You can oversample from 2X to 8X, as well as use automatic oversampling from 2X to 4X / 4X to 8X.
Input Learn - You can set your input-gain to a preferred setpoint automatically.
Zero-latency IR-loader - You can load your own impulse responses (IRs) to simulate different speaker cabinets. You can also adjust the IR length and compare it with the frequency response in a graphical way.
User IR Directory - You can - You can store your own IRs in a separate folder and access them easily from the plugin.
As you can see, this plugin offers a lot of features and options to customize your guitar tone. But how does it sound and perform? Let's take a look at some of the pros and cons of this plugin.
Pros
Realistic and dynamic sound - The plugin sounds very close to the real amps it emulates, and responds well to your playing dynamics and guitar volume. You can get a wide range of tones, from clean and crunchy to heavy and brutal, depending on your settings and preferences.
Easy to use and tweak - The plugin has a simple and intuitive interface, with clear labels and tooltips for each control. You can easily adjust the parameters and hear the changes in real-time. You can also use the preset manager to save and load your own presets, or browse through the factory presets that cover various styles and genres.
Flexible and versatile - The plugin allows you to mix and match different components of the tone chain, such as pedals, amps, tubes, rack effects, and IRs. You can also use the plugin as a standalone application or as a VST/AU/AAX plugin in your DAW. You can use it for recording, practicing, or live performance.
Affordable and value for money - The plugin is priced at $59.99 USD, which is quite reasonable considering the quality and features it offers. You can also download a free trial version from the official website to test it out before buying it.
Cons
CPU intensive - The plugin can be quite demanding on your CPU, especially if you use high oversampling rates or multiple instances of the plugin. You may need to optimize your system performance or lower the settings to avoid glitches or crashes.
Limited cabinet options - The plugin comes with only four IRs for the cabinet simulation, which may not be enough for some users who want more variety or realism. You can load your own IRs, but you may need to buy or download them from other sources.
No MIDI support - The plugin does not support MIDI input or output, which means you cannot control it with a MIDI controller or automate it with MIDI messages. You can only use your mouse or keyboard to adjust the settings.
Comparison
There are many other guitar amp simulation plugins on the market, such as Amplitube, Guitar Rig, BIAS FX, Helix Native, etc. How does TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R compare to them?
Well, there is no definitive answer to this question, as different plugins may suit different users depending on their needs, preferences, budget, etc. However, here are some general points of comparison that may help you decide:
PluginPriceAmp ModelsPedal ModelsRack ModelsCabinet Models
TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R$59.99 USD2 (TSE X50 v2.0 Pre+PA and TSE X30 v2.0 Preamp)6 (NoiseGate, TSE808, R47, Phaser, Pandora's Box, SDM-2)4 (Tuner, Delay, Equalizer, Reverb)4 (IR loader)
Amplitube 5 MAX$399.99 USD129 (based on various famous amps)107 (based on various famous pedals)37 (based on various famous rack effects)100 (based on various famous cabinets)
Guitar Rig 6 PRO$199 USD14 (based on various famous amps)68 (based on various famous pedals)24 (based on various famous rack effects)N/A (uses convolution reverb instead)
BIAS FX 2 Elite$299 USD60 (based on various famous amps)100 (based on various famous pedals)30 (based on various famous rack effects)100 (based on various famous cabinets)
Helix Native$399.99 USD72 (based on various famous amps)194 (based on various famous pedals)37 (based on various famous rack effects)37 (based on various famous cabinets)
As you can see, TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R has fewer amp, pedal, rack, and cabinet models than its competitors, but it also has a lower price and a more focused approach to rock and metal tones. It may not have the variety or the customization options of the other plugins, but it has the quality and the realism that many users are looking for. Ultimately, it depends on what you need and what you like.
Installation
Now that you have an idea of what this plugin can do, let's see how to install it and activate it on your computer. The plugin is available for both Windows and Mac OS X platforms, and it supports 32-bit and 64-bit systems. Here are the steps to follow:
Download the plugin - You can download the plugin from the official website of TSE Audio, which is https://www.tseaudio.com/home. You will need to create an account and log in to access the download link. You will also receive an email with your license file attached.
Extract the plugin - Once you have downloaded the plugin, you will need to extract it from the zip file. You will find two folders inside: one for Windows and one for Mac OS X. Choose the one that corresponds to your system and open it.
Install the plugin - Inside the folder, you will find an installer file that will guide you through the installation process. Just follow the instructions and choose the destination folder and the plugin format that you want to install. You can install both VST and AU formats if you want.
Activate the plugin - After the installation is complete, you will need to activate the plugin with your license file. To do this, you will need to run the keygen file that is included in the folder. This will generate a serial number that you will need to copy and paste into the plugin's activation window. Alternatively, you can use the license file that was sent to your email and drag and drop it into the plugin's activation window.
Enjoy the plugin - Once you have activated the plugin, you can start using it in your DAW or as a standalone application. You can access the plugin's settings by clicking on the gear icon in the upper right corner of the interface.
Congratulations! You have successfully installed and activated TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R on your computer. Now let's see how to use it effectively.
Usage
TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R is a very easy and intuitive plugin to use, but it also has some advanced features and options that you may want to explore. Here are some tips on how to access and configure the plugin in your DAW, as well as how to use the pedal board, the amp models, the rack effects, and the IR loader.
How to access and configure the plugin in your DAW?
To use TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R in your DAW, you will need to insert it as an effect on your guitar track or bus. Depending on your DAW, this may vary slightly, but generally you will need to do something like this:
Create a new audio track or bus for your guitar signal.
Select TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R from your list of available plugins and drag it onto your track or bus.
The plugin's interface will open up and you will see a signal chain with different components that you can turn on or off by clicking on them.
You can adjust the input gain of your guitar signal by using the input learn button on the upper left corner of the interface. This will set your input gain to a preferred setpoint automatically.
You can also adjust the output volume of the plugin by using the output knob on the upper right corner of the interface.
You can access the plugin's settings by clicking on the gear icon on the upper right corner of the interface. Here you can change the oversampling rate, the IR length, the IR directory, and other options.
You can use the preset manager on the lower left corner of the interface to save and load your own presets, or browse through the factory presets that cover various styles and genres.
That's it! You have successfully inserted and configured TSE Audio X50 V2.4.8 WiN OSX Incl Keygen-R2R in your DAW. Now let's see how to use the different components of the plugin to shape your guitar tone.
How to use the pedal board?
The pedal board is the first component of the plugin's signal chain, and it consists of six pedals that you can use to shape your guitar signal before it reaches the amp. These pedals are:
NoiseGate - This is a simple noise gate that cuts off any unwanted noise or hum from your guitar signal. You can adjust the threshold and release parameters to control how much and how fast the noise gate works.
TSE808 - This is a digital emulation of a famous overdrive pedal that is often used to boost and tighten up high-gain amp tones. You can adjust the drive, tone, and level parameters to control how much distortion, brightness, and volume you want from this pedal.
R47 - This is a digital emulation of a famous distortion pedal that is known for its aggressive and cutting tone. You can adjust the distortion, filter, and volume parameters to control how much saturation, mid-range, and loudness you want from this pedal.
Phaser - This is a digital emulation of a classic phaser effect that creates a sweeping modulation of your guitar signal. You can adjust the rate, depth, feedback, and mix parameters to control how fast, deep, resonant, and wet you want this effect to be.
Pandora's Box - This is a digital emulation of a unique modulation pedal that combines chorus, flanger, tremolo, and vibrato effects in one. You can adjust the mode, speed, depth, feedback, and mix parameters to control which effect you want to use and how intense you want it to be.
SDM-2 - This is a digital emulation of a modern distortion pedal that offers a wide range of tones from mild overdrive to heavy metal. You can adjust the gain, bass, mid, treble, and level parameters to control how much distortion, low-end, mid-range, high-end, and volume you want from this pedal.
To use these pedals, you simply need to click on them to turn them on or off. You can also drag and drop them to change their order in the signal chain. You can tweak their parameters by using your mouse or keyboard to move the knobs or sliders. You can also use your mouse wheel to fine-tune them. You can see the values of each parameter by hovering over them with your mouse cursor.
By using these pedals, you can create various combinations of effects and tones for your guitar signal. For example, you can use the TSE808 to boost your amp's gain and tighten up your low-end, or you can use the R47 to add some extra bite and aggression to your tone. You can also use the Phaser or Pandora's Box to add some modulation and movement to your sound, or you can use the SDM-2 to create a different flavor of distortion. The possibilities are endless!
How to use the amp models?
The amp models are the core component of the plugin's signal chain, and they consist of two digital emulations of famous guitar amps that are known for their rock and metal tones. These amp models are:
TSE X50 v2.0 Pre+PA - This is a digital emulation of a famous US guitar amp that has three channels: green, red MK1, and red MK2. The green channel is modeled after the first amp, while the red channels are modeled after two almost similar amps. You can switch between the red channels by using the MK1/MK2 switch, or bypass the preamp or poweramp sections by using the PRE/PA switches. You can also change the power tubes from 6L6GC to EL34 by using the TUBE switch, or adjust the bias of the poweramp by using the BIAS knob.
TSE X30 v2.0 Preamp - This is another digital emulation of a famous guitar amp that has one channel with high-gain and low-gain modes. You can switch between the modes by using the HI/LO switch, or bypass the preamp section by using the PRE switch. You can also change the power tubes from 6L6GC to EL34 by using the TUBE switch, or adjust the bias of the poweramp by using the BIAS knob.
To use these amp models, you simply need to click on them to turn them on or off. You can also drag and drop them to change their order in the signal chain. You can tweak their parameters by using your mouse or keyboard to move the knobs or switches. You can also use your mouse wheel to fine-tune them. You can see the values of each parameter by hovering over them with your mouse cursor.
By using these amp models, you can create various combinations of tones and sounds for your guitar signal. For example, you can use the TSE X50 v2.0 Pre+PA to get a classic US metal tone with a tight low-end and a scooped mid-range, or you can use the TSE X30 v2.0 Preamp to get a modern high-gain tone with a lot of saturation and harmonics. You can also mix and match different preamp and poweramp sections, as well as different tubes and bias settings, to create your own custom amp sounds. The choice is yours!
How to use the rack effects?
The rack effects are the third component of the plugin's signal chain, and they consist of four essential tools that you can use to enhance your guitar tone. These rack effects are:
Tuner - This is a simple tuner that helps you tune your guitar accurately. You can see the note name, frequency, and tuning meter on the display. You can also mute your guitar signal by clicking on the MUTE button.
Delay - This is a digital emulation of a classic delay effect that creates echoes of your guitar signal. You can adjust the time, feedback, mix, and sync parameters to control how long, how many, how loud, and how in sync with your tempo you want your echoes to be.
Equalizer - This is a digital emulation of a graphic equalizer that lets you boost or cut specific frequency bands of your guitar signal. You can adjust the gain of each band by using your mouse or keyboard to move the sliders. You can also use your mouse wheel to fine-tune them. You can see the values of each band by hovering over them with your mouse cursor.
Reverb - This is a digital emulation of a reverb effect that creates a sense of space and ambience for your guitar signal. You can adjust the size, decay, damp, and mix parameters to control how big, how long, how bright, and how wet you want your reverb to be.
To use these rack effects, you simply need to click on them to turn them on or off. You can also drag and drop them to change their order in the signal chain. You can tweak their parameters by using your mouse or keyboard to move the knobs or sliders. You can also use your mouse wheel to fine-tune them. You can see the values of each parameter by hovering over them with your mouse cursor.
By using these rack effects, you can add some extra polish and depth to your guitar tone. For example, you can use the Delay to create some rhythmic or atmospheric echoes, or you can use the Equalizer to fine-tune your tone and balance your frequencies. You can also use the Reverb to create some space and ambience for your sound, or you can use the Tuner to make sure your guitar is in tune.
How to use the IR loader?
The IR loader is the last component of the plugin's signal chain, and it allows you to load your own impulse responses (IRs) to simulate different speaker cabinets. An impulse response is a short audio file that captures the sound and characteristics of a speaker cabinet in a specific room and mic position. By using IRs, you can get a more realistic and natural sound for your guitar tone.
To use the IR loader, you simply need to click on it to turn it on or off. You can also drag and drop it to change its order in the signal chain. You can load an IR by clicking on the LOAD button and browsing through your computer's folders. You can also access your user IR directory by clicking on the USER button, where you can store your own IRs in a separate folder.
Once you have loaded an IR, you can adjust its length by using the LENGTH knob, or compare it with the frequency response by using the COMPARE button. You can also bypass the IR by using the BYPASS button, or mute it by using the MUTE button.
By using the IR loader, you can experiment with different speaker cabinets and mic positions for your guitar tone.